Tutorial on Spur gear design with example :Study Zone

January 19, 2015

Tutorial on Spur gear design with example

A pair of 20^o full depth gears mesh at extended centres - the 12 tooth pinion's profile shift is 0.5, the 18 tooth wheel's is 0.4. What are the pitch and addendum diameters of the gears and what is the pressure angle?

Visit the below link for Tutorial and answer.

http://www-mdp.eng.cam.ac.uk/web/library/enginfo/textbooks_dvd_only/DAN/gears/meshing/meshing.html

Disclaimer:
The above article doesn't give you any guarantee and the sole purpose of this article is to share my learning in the way I understood. Any comments to refine this article are welcome with great pleasure. Please report any breaking link by commenting below.

January 19, 2015