Showing posts with label Embedded basics. Show all posts
Showing posts with label Embedded basics. Show all posts

May 27, 2016

ARM Bare Metal Programming with GNU

ARM bare metal programming was considered a dark art and known only to very few. Here are the links that opens it to you on how to write a startup code, linker script and all that is hidden behind your popular IDEs. With this knowledge, you can start to write your code without the help of any IDEs. You can completely take in control where to place each of your bits on the RAM. Enjoy exploring the core of embedded programming.

Embedded programming with the GNU toolchain - bravegnu.org
Building Bare-Metal ARM Systems with GNU - embedded.com
Building Bare-Metal ARM Systems with GNU - mikrocontroller.net

May 17, 2016

Articles on 'const' and 'volatile' qualifiers

More recently I went through some of the articles and lectures on C and C++ by Dan Saks, a consultant in US. I especially liked his lecture on 'const' qualifier which was more thought provoking and felt, a must share article. http://www.dansaks.com/articles.htm. Also, he is a columnist at embedded.com

August 13, 2015

A complete course materials on embedded System design

This is a series of presentation from an Embedded System Course that covers the course content in total of 8 modules. Below is the link to all the modules. These presentations will suffice the basics to start with embedded system design.

  1. Embedded C and 8-bit Microcontroller
  2. System Design Using ARM
  3. Embedded Linux
  4. Embedded RTOS (VxWorks, RTLinux)
  5. System Design using DSP
  6. System Design using FPGAs

November 24, 2014

Centre for Development and Advanced Computing (C-DAC) - Education and Training programmes

C-DAC's Education and Training programmes are aimed at creating skilled manpower in the country by providing quality training programmes in the field of Electronics and ICT. This activity started almost two decades ago with a humble beginning of training about 20 students per year, but has today grown to an extent of training more than 5000 students per year. It also grew from just one training centre to about 50 training centres across India and has even made its presence in several countries abroad. In addition to conducting wide range of training programmes in the areas of Information, Communication and Electronics technologies, C-DAC also develops ICT tools and technologies for modern methods of imparting education and training to masses. The Education and Training activities of C-DAC are governed and steered by Academic Council (AC) and Academic Management Committee (AMC).
Presently, C-DAC offers its various training programmes through its own training centres in Bengaluru, Chennai, Hyderabad, Kolkata, Mohali, Mumbai, Noida, Pune and Thiruvananthapuram, and its network of Authorised Training Centres (ATC) spread across the country.
The various activities under the umbrella of C-DAC's Education and Training Programmes are described below:
Post Graduate Diploma Programmes
C-DAC conducts two batches of following PGD...
Go

Formal Training Programmes
C-DAC also conducts formal training programmes...

Go

Faculty Development Programmes
C-DAC conducts advanced faculty training programmes...


Go

Corporate Training Programmes
C-DAC offers various specialized training...
Go

Education Technologies
C-DAC has taken major initiatives in developing...
Go

Other Initiatives
Capacity Building Initiatives...

Go

International Training Program
International Training Program...
Go


November 13, 2014

NIELIT | Course Calendar 2015

http://calicut.nielit.in/course/calendarcedti.asp

Course Code Course Name Duration Starting Date Course Fee * Course Brochure
Information Technology Group
 SW100 PG Diploma in Software Technology  6 Month(s)   Mar-9-2015  67000 
    SW101 Diploma in .NET Technologies  3 Month(s)   Dec-8-2014  35100 
    SW102A Diploma in JEE  3 Month(s)   Mar-9-2015  35100 
    SW102B Diploma in Android Application Development  3 Month(s)   Mar-9-2015  35100 
 SW250 Diploma in PHP and jQuery  3 Month(s)   Feb-25-2015  30000 
 SW302 Diploma in .Net Technologies (Online Course)  3 Month(s)   Feb-25-2015  10000 
 SW304 Diploma in PHP Programming (Online Course)  3 Month(s)   Feb-25-2015  10000 
 SW500 PG Diploma in Information Security and Cloud Computing  24 Week(s)   Feb-25-2015  73000 


Embedded Systems Group
 ED500 PG Diploma in Embedded System Design  24 Week(s)   Feb-25-2015  80000 
 AED600 PG Diploma in Embedded Real Time Systems  24 Week(s)   Feb-25-2015  80000  -


Process Control and Instrumentation Group
 PC100 PG Diploma in Industrial Automation System Design  24 Week(s)   Mar-23-2015  80000 
 PC500 Advanced Diploma-PLC/SCADA/DCS Engineer  16 Week(s)   May-4-2015  40000 


VLSI Design Group
 US100 Diploma in Medical Ultrasound  200 Hour(s)   Mar-30-2015  25000 
 AVL500 PG Diploma in VLSI & Embedded Hardware Design  24 Week(s)   Feb-25-2015  80000  -
 AVL600 PG Diploma in ASIC Design and Verification  24 Week(s)   Mar-30-2015  80000  -



General Details:

Click on individual course codes for more details of the courses. Some courses are modular programs. The full course name is displayed in bold face. One can apply for total/individual modules. For PG Diploma courses, Diploma Students will be given only 'Advanced Diploma' certificate instead of PG Diploma.
Eligibility:
Engineers/Diploma/Graduates with appropriate experience. Please click on individual courses to see the eligibility details of that particular course. Final year students may also apply.
Hostel:
Hostel Facility is available for boys and girls on daily or monthly chargeable basis. However, students are required to pay the hostel fees for the duration of the course for which they are seeking admission at the time of joining the course. The hostel rent varies from Rs.850 to Rs.1400 per month depending on the location of the accommodation and facilities available. Caution deposit varies from Rs.300 to 1500 depending upon the duration of the stay, and the same is required to be paid in addition to the hostel rent.
Fees:
The students are normally required to pay the entire course fee at the time of admission. However, in the case of certain specified courses, the students can also make payment of fees in installments (applicable only for courses mentioned in the training calendar and are of duration 4 months or more). Service tax on the course fee will be charged extra at actuals. SC/ST/Physically Handicapped candidates are eligible for seat reservation for all the courses as per Govt. of India norms.
Tution Fees/Examination fees are waived for SC/ST students subject to terms and conditions. The students are requested to contact the Training Officer to know the fees payable by them for the Course Materials and other charges.

Intimation of Selection:
The students selected for the course/s shall be intimated of his selection by email/post/courier. The students are therefore required to provide their correct email address and are advised to check their email/visit our website to know about their selection. List of selected students shall also be available in our website (for select courses only).
How to Apply:
Students can apply for the course/s by either filling up the online application form or by downloading the application form and forwarding the same to the Training Officer, along with DD for Rs.1000/- as Advance Deposit.  For the admitted students, this advance deposit will be converted to caution deposit which will be refunded at the end of the course. This advance deposit will not be refunded for a selected candidate who does not join the course.

1. Procedure for Online application : Students can apply online by filling up the online application form. Click here to apply online. The students are first required to obtain the DD for Rs.1000/- towards Advance Deposit. The students are required to fill the details with regards to the DD Number, Date and amount. The students are requested to note down their registration number allotted after pressing the "Submit" button and forward the demand draft mentioning their name and their online registration number. Online registrations not containing the details with regards to the Advance Deposit details will not be considered for registration. If the payment is done through online banking or directly through bank, the original receipt/counterfoil of the same should reach here before the last date to apply.

2. Procedure for applying using the Application form : The students can download the application form from our web site (Download Application Form ) and fill the particulars and forward the same to the Training Officer along with the requisite fee as mentioned above.
3. Mode of  Payments : The course fee can be paid by one of the following methods

August 08, 2014

Microchip PIC Timer Tutorial

Concept of timer is clearly explained in the download below. Also, a clear differentiation between timer and counter is provided. Download (.pdf)

August 07, 2014

Embedded programming for LCD interfacing with microcontroller (ATMEL / PIC)


Embedded programming for LCD display Interfacing
(Book: The 8051 Microcontroller an Embedded Systems – using Assembly and C, Muhammad Ali Mazidi, Janice Gillispie Mazidi, Rolin D. McKinlay)
LCD Interfacing
Pin
Symbol
I/O
Description
1.   
Vss
-
Ground
2.   
Vcc
-
+5V power supply
3.   
VEE
-
Power supply to control contrast
4.   
RS
I
RS=0 – select command register
RS =1 – select data register
5.   
R/W
I
R/W=0 – Write
R/W=1 – Read
6.   
E
I/O
Enable
7.   
DB0-DB7
I/O
8-bit data bus

LCD Command Codes
Code
(Hex)
Command to LCD instruction register
1
Clear display screen
2
Return home
4
Decrement cursor (shift cursor to left)
6
Increment cursor (shift cursor to right)
5
Shift display right
7
Shift display left
8
Display off, cursor off
A
Display off, cursor on
C
Display on, cursor off
E
Display on, cursor blinking
F
Display on, cursor blinking
10
Shift cursor position to left
14
Shift cursor position to right
18
Shift the entire display to the left
1C
Shift the entire display to the right
80
Force cursor to beginning of 1st line
C0
Force cursor to beginning of 2nd line
38
2 lines and 5×7 matrix

Example Program:
To write/read on the LCD, first a set of commands (from above table) should be sent to the LCD module to set mode and clear display. Below is a set of functions in an order to make you understand easily.
(Don’t consider the item displayed, instead “HELLO!” will be displayed)


August 02, 2014

Embedded courses you can do after your graduation for bright future

http://www.nielit.gov.in/embedded.aspx

Sl No. Name of the course Batch Size Duration Course Fees
1. ED:500:PG Diploma in Embedded System Design 30 6 months visit above link
2. ED:505:Embedded  S/w & RT Linux Course 30 3 weeks
3. ED508:Embedded Product Design Course 30 2 weeks
4. PG Diploma in VLSI Design 30 6 months

February 08, 2014

Link | Arduino - Easy to use Tutorial

You can learn how to use Arduino board and IDE (software) using the tutorial provided (TO BLINK AN LED) in the Arduino page here.

To learn how to interface various analog sensors and to know various library functions (with examples), visit the page here.

Function available in Arduino & references: here

Other sites:
1. http://www.instructables.com/id/Basic-Arduino-Tutorials-01-Blinking-LED/

2. http://www.robotshop.com/blog/en/arduino-5-minute-tutorials-lesson-1-software-3640

Link | Buy Arduino UNO (Best Price)

Below are the dirct distributors of Arduino in India

1.
Arduino Basic Kit

Arduino Basic Kit (Arduino UNO + Basic components))

Description: Arduino UNO + Some basic required components
Rs. 1,910/-






2.
Arduino UNO - R3 with USB Cable (Arduino-Italy)

Arduino UNO - R3 with USB Cable (Arduino-Italy)

Description: This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2...
Rs. 1,430/-



3. http://www.simplelabs.co.in/

Look for More direct Distributors of Arduino-Italy
Simple Labs, rhydoLABZ, PearlLabs, Tenet Technetronics, Explore Labs, SUMEET Instruments, Protocentral, Ardour Labs, Fab.to.Lab, Bit.gen.in, MG Super LABS Technologies, GURMEETWEB TECHNICAL LABS, Tanna Educationaò 
 
 

November 22, 2013

CS2364 - Embedded Systems - 2 Marks with answers

CS2364 - Embedded System for Electronics 2 marks for and Instrumentation Engineering students as Per Anna University R2008.
 Download Link

February 24, 2013

Learn Embedded C Programming_Microchip_PIC

There are various microcontrollers available such as Microchip PIC, ATMEL, HTC, Motorola, Intel and more.. One among the most commonly used is the Microchip PIC. Learn Embedded hardware and software using Microchip PIC.. Some books available on embedded C programming is available at freebooks.dgpride.com
you can also purchase books online at flipkart.com, google books and more.

February 17, 2013

Electronic Hobbyist, Beginners, Beware of buying at your nearest stores.

If you are interested to learn embedded systems on your own, you wold need a basic development board, that can be PIC, ATMEL or anything. When you buy at a store, they keep dual prices; lower reasonable price for the professionals and higher (usually double) for the beginners), and if you have no idea about the price, they take advantage of your innocence and sell their product at higher price, almost double the cost. I'm telling this on my own experience. 

I would recommend you buy online, since they give you reasonable and standard price (they cannot post dual price online) , also it reduces reseller costs. Or if you have to buy at your nearest store, just check online for the product (or similar product to know the approximate max. price), now go to the store and check the product price, if it is closest to the price you saw online, buy it! you are lucky. Else boldly ask, why is it double the price or use your own methods, if there are many customers around you, he definitely won't accept it, if you are the only person around, may be there is a chance that you can get it at the reasonable price. 

For instance, I bought the following in a store and later when I checked it online, I was shocked to see that I bought it for almost double the price. So, Beware! Don't do the same mistake that I did. Buy smart.

Product
Store Price
Online price
PIC development board V3 (Make: HPS)
PIC DEVELOPMENT BOARD FULL FLEDGE - Click Image to Close

Rs. 1,800
(@ Sunrise Electronics, Coimbatore)
Rs. 800
Universal Programmer (Model: TOP2005+)

Rs. 5,000
(@ Sunrise Electronics, Coimbatore)
Rs. 3,200

Some good online store to purchase electronics and embedded components,
  1. http://www.embeddedmarket.com/
  2. http://www.robokits.co.in/shop/
  3. http://www.hobby2go.com/
  4. http://www.simplelabs.co.in/ (Arduino)
  5. http://www.digikey.com/scripts/DkSearch/dksus.dll?lang=en&keywords=


Receive all updates via Facebook. Just Click the Like Button Below

▼

You can also receive Free Email Updates:

dgpride - Study Zone - Free Books - Tamil Lyrics

Copyright © 2008 -2012 dgpride. All rights reserved.

Subject/Topics

2 Marks (26) 8051 (1) AC Machines (7) Animations (1) Anna University Chennai (31) Arduino (4) ARM (3) Audio (1) Basic C Concepts (8) Basic Electronics (13) Basic principles (9) Book list (1) CAD (1) Chemical (2) Circuit theory (6) Civil (2) Cloud Computing (1) Communication (4) Competitive exams (2) Computer Architecture (4) Control system and components (9) CSE (40) Curriculum (4) DC Machines (9) Did you know (14) Digital (13) DLC (4) Documentation (1) DSP (1) EC 2201 (3) ECE (45) EDC (1) EEE (34) EIE (63) Electrical (35) Electronics (43) Electroplating (2) Emacs (1) Embedded basics (19) Embedded C Programming (19) Embedded Linux (5) Embedded System (22) Engineering basics (15) Environmental Science (1) Fibre Optics (1) Filters (2) FPGA (1) GATE (3) General (7) GNU (4) Handwritten (1) Hobbyist (15) How to (8) HTML (3) Humanities (2) IC Engines (7) ICE (5) Industrial Electronics (10) Industrial Instrumentatin (2) industrial process (2) Instrumentation (21) IoT (2) IT (2) Laboratory Manuals (17) LabVIEW (2) Lesson notes (2) LIC (2) Links (9) Linux (8) Magnetics (1) Management (1) Mechanical (5) Mechatronics (9) Microcontrollers (14) Microprocessors (9) Microsoft (1) Motivation (1) Must Know (11) Networks (1) NuttX (1) Objective type (1) Open Source (1) Opportunities (7) Oscillators (2) Part Time (1) Physics (1) Post Graduation (1) Power Electronics (12) Power Plant Engineering (2) Power Supplies (2) Previous GATE Papers (1) Process Control (2) Project (4) Protocol (1) R2008 (11) R2009 (1) R2013 (1) Recruitment (2) Research (2) Robotics (9) RTOS (3) Signal Processing (8) Signals and Systems (4) SMPS (1) Software tutorial (4) Stepper Motor (2) Syllabus (5) Texas Instruments (2) Thermodynamics (2) Training and Placement (6) Transducer Engineering (2) Transformer (2) Transmission (1) Tutorials (48) Two Marks (26) U-Boot (1) University Question Papers (16) Verilog (1) Video (4) Virtual Instrumentation (3) Visual Basic (21) VLSI (11) Web designing (4) Wi-Fi (3) Wireless (6)